Whats the problem - Page 10

tigmaster · 06-27-2008, 08:38 AM

Wait so you only sent them the cylinder yet it is going to be a larger bore than before? How do they know what to bore it out to? Did you know every single manufacturer has different piston to ring tolerances that change the exact size they bore to. Just because you say it is 52.5mm or something like that does not mean that is what they need to bore it out to.

abowler10154 · 06-27-2008, 10:57 AM

I sent them the cylinder, told them what its bored out to, info about it, they asked for the piston size, i gave them that, and they replated the cylinder, its ready to be shipped back. I found a piston that is the same size as what i told them it was, and now im ready to buy a gasket kit. Is there a special sized gasket kit i need? or just any for a cr85?

gscx · 06-27-2008, 10:58 AM

tig, if you send in extra stuff they will charge you more because they are asses

gscx · 06-27-2008, 10:59 AM

the stock gasket kit should work, but you should ask the company that bored it out, im not sure

abowler10154 · 06-27-2008, 11:03 AM

They didnt charge extra for the studs and stuff. Everything worked out good. I dont know who bored it out. but that piston kit i asked about would work...weisco 52.5 piston kit. (same piston size as i told them) And a stock gasket kit. So everything is good right? Im gonna order the kits in right now since everything worked out good with the cylinder.

gscx · 06-27-2008, 11:10 AM

if they said its fine then you are ok

abowler10154 · 07-06-2008, 05:15 PM

I got the piston, gaskets, and cylinder. The piston fits inside of the cylinder, but its a tight fit. The piston is touching the cylinder walls. Is this ok? Or do i need to send it back and get a smaller piston? Well once i actually install it on the bike, i think only the piston ring will be touching the cylinder walls, not the piston itself.

Is the piston ring supposed to be touching the cylinder walls?

Sry, i know this thread is so looooong.

tjscott2012 · 07-06-2008, 06:28 PM

the rings yes, the piston no.

abowler10154 · 07-29-2008, 09:02 PM

Alright, just the last update guys, my bike is back up and running, after about 2-3 months of it just sitting there, i can ride again. Thanks so much for all your help, i really appreciate it.

gscx · 07-29-2008, 09:24 PM

no problem, anything else goes wrong just come back here and we will help

06-27-2008, 08:38 AM	#91 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,229	Wait so you only sent them the cylinder yet it is going to be a larger bore than before? How do they know what to bore it out to? Did you know every single manufacturer has different piston to ring tolerances that change the exact size they bore to. Just because you say it is 52.5mm or something like that does not mean that is what they need to bore it out to. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

06-27-2008, 10:58 AM	#93 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,067	tig, if you send in extra stuff they will charge you more because they are asses __________________ 2004 YZ-125 - PC exhaust, Blue applied triple tree, blue turner OV bars, ASV levers, Sunline sprocket and gold chain, FC springs, white plastic . DONT MESS WITH ME, I HAVE A HAMMER AND WILL USE IT!!!!!

06-27-2008, 10:59 AM	#94 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,067	the stock gasket kit should work, but you should ask the company that bored it out, im not sure __________________ 2004 YZ-125 - PC exhaust, Blue applied triple tree, blue turner OV bars, ASV levers, Sunline sprocket and gold chain, FC springs, white plastic . DONT MESS WITH ME, I HAVE A HAMMER AND WILL USE IT!!!!!

06-27-2008, 11:10 AM	#96 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,067	if they said its fine then you are ok __________________ 2004 YZ-125 - PC exhaust, Blue applied triple tree, blue turner OV bars, ASV levers, Sunline sprocket and gold chain, FC springs, white plastic . DONT MESS WITH ME, I HAVE A HAMMER AND WILL USE IT!!!!!

07-06-2008, 05:15 PM	#97 (permalink)
abowler10154 C Rider Join Date: Sep 2007 Posts: 65	I got the piston, gaskets, and cylinder. The piston fits inside of the cylinder, but its a tight fit. The piston is touching the cylinder walls. Is this ok? Or do i need to send it back and get a smaller piston? Well once i actually install it on the bike, i think only the piston ring will be touching the cylinder walls, not the piston itself. Is the piston ring supposed to be touching the cylinder walls? Sry, i know this thread is so looooong. Last edited by abowler10154; 07-06-2008 at 05:37 PM.

06-27-2008, 10:57 AM	#92 (permalink)
abowler10154 C Rider Join Date: Sep 2007 Posts: 65	I sent them the cylinder, told them what its bored out to, info about it, they asked for the piston size, i gave them that, and they replated the cylinder, its ready to be shipped back. I found a piston that is the same size as what i told them it was, and now im ready to buy a gasket kit. Is there a special sized gasket kit i need? or just any for a cr85?

06-27-2008, 11:03 AM	#95 (permalink)
abowler10154 C Rider Join Date: Sep 2007 Posts: 65	They didnt charge extra for the studs and stuff. Everything worked out good. I dont know who bored it out. but that piston kit i asked about would work...weisco 52.5 piston kit. (same piston size as i told them) And a stock gasket kit. So everything is good right? Im gonna order the kits in right now since everything worked out good with the cylinder.

07-06-2008, 06:28 PM	#98 (permalink)
tjscott2012 The Spam man Join Date: Nov 2007 Location: Hurley, Mo Posts: 4,197	the rings yes, the piston no. __________________ This is my signature. Its awesome

07-29-2008, 09:02 PM	#99 (permalink)
abowler10154 C Rider Join Date: Sep 2007 Posts: 65	Alright, just the last update guys, my bike is back up and running, after about 2-3 months of it just sitting there, i can ride again. Thanks so much for all your help, i really appreciate it.

07-29-2008, 09:24 PM	#100 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,067	no problem, anything else goes wrong just come back here and we will help __________________ 2004 YZ-125 - PC exhaust, Blue applied triple tree, blue turner OV bars, ASV levers, Sunline sprocket and gold chain, FC springs, white plastic . DONT MESS WITH ME, I HAVE A HAMMER AND WILL USE IT!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2003 XR250R shock problem	nem881	Honda 4-Stroke	13	01-05-2008 08:21 PM
seeking for a good advice - klutch problem yz 125 04	israelmoto	General Bike Repair	28	12-26-2007 11:49 PM
Problem With Clutch. NEED HELP!!!	redcatgy200	General Bike Repair	2	11-16-2007 04:41 AM
Identifying your problem	wr250f95	How-To Articles	28	10-20-2007 06:13 AM
Brake problem, lack of pressure	rhoads157	General Bike Repair	5	07-23-2007 06:09 AM

Remove advertisements Sponsored links