helecoil 101. (spelling?) - Page 2

Wopstar · 06-27-2008, 09:25 AM

The only way you can get all the shavings out for sure is to split the case and do it on the bench then clean it all up. If you drill and tap it while it's together you will get shavings in the case guaranteed. You could use a shp vacuum to try and suck the shavings out while you are drilling and tapping. This will help some. I would then flush out the case with A LOT of oil. Just dump oil in the case with the plug out and let it flush out as much as possible. This still will not get it all out. Then change the oil and filter every time you ride it untill it comes out with no metal. This is still not recommneded but it may keep you from splitting the case.

tigmaster · 06-27-2008, 09:29 AM

As far as damage goes... Well it could destroy every single part in there and would be completely reasonable if it did.

Wopstar · 06-27-2008, 09:31 AM

Quote:

Originally Posted by tigmaster

As far as damage goes... Well it could destroy every single part in there and would be completely reasonable if it did.

Tig is correct.

turtlemann14 · 06-27-2008, 11:47 AM

diesel fuel works better to wash your case out.... so i find

gscx · 06-27-2008, 12:13 PM

just split the cases, its not that dard, youll learn alot about your bike when you do it too

turtlemann14 · 06-27-2008, 12:18 PM

true that and if you see anything going bad you can prepare to replace it

Wopstar · 06-27-2008, 12:26 PM

I think it's funny that we are all having this discussion and the original poster has not even been back yet!

tigmaster · 06-27-2008, 01:17 PM

The only problem with diesel fuel in the crankcase is your clutch disks......... They are not too tolerant of diesel. Think about how diesel destroy many things such as most rubber components i.e. rubber seals. Think about how important it is to soak clutch disks in oil before installing them. Then you go and remove that oil with diesel.

06-27-2008, 09:25 AM	#11 (permalink)
Wopstar A Rider Join Date: Sep 2006 Location: Lake Havasu Arizona Posts: 858 iTrader: (0)	The only way you can get all the shavings out for sure is to split the case and do it on the bench then clean it all up. If you drill and tap it while it's together you will get shavings in the case guaranteed. You could use a shp vacuum to try and suck the shavings out while you are drilling and tapping. This will help some. I would then flush out the case with A LOT of oil. Just dump oil in the case with the plug out and let it flush out as much as possible. This still will not get it all out. Then change the oil and filter every time you ride it untill it comes out with no metal. This is still not recommneded but it may keep you from splitting the case. __________________ Stickers Add Horsepower!! Last edited by Wopstar; 06-27-2008 at 11:59 AM.

06-27-2008, 09:29 AM	#12 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,526 iTrader: (1)	As far as damage goes... Well it could destroy every single part in there and would be completely reasonable if it did. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

06-27-2008, 11:47 AM	#14 (permalink)
turtlemann14 Pro Mototips Member Join Date: Oct 2007 Location: West Virginia Posts: 3,990 iTrader: (0)	diesel fuel works better to wash your case out.... so i find __________________ If it does not move at first, get a bigger hammer!! Myspace Yamaha 1982 xj550 under bike lights Kawasaki klx250 1979 custom fiberglass silencer+ Honda xr200r 1985 stock = Dakaw Dk250 2008

06-27-2008, 12:13 PM	#15 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,233 iTrader: (0)	just split the cases, its not that dard, youll learn alot about your bike when you do it too __________________ Sold

06-27-2008, 12:18 PM	#16 (permalink)
turtlemann14 Pro Mototips Member Join Date: Oct 2007 Location: West Virginia Posts: 3,990 iTrader: (0)	true that and if you see anything going bad you can prepare to replace it __________________ If it does not move at first, get a bigger hammer!! Myspace Yamaha 1982 xj550 under bike lights Kawasaki klx250 1979 custom fiberglass silencer+ Honda xr200r 1985 stock = Dakaw Dk250 2008

06-27-2008, 12:26 PM	#17 (permalink)
Wopstar A Rider Join Date: Sep 2006 Location: Lake Havasu Arizona Posts: 858 iTrader: (0)	I think it's funny that we are all having this discussion and the original poster has not even been back yet! __________________ Stickers Add Horsepower!!

06-27-2008, 01:17 PM	#18 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,526 iTrader: (1)	The only problem with diesel fuel in the crankcase is your clutch disks......... They are not too tolerant of diesel. Think about how diesel destroy many things such as most rubber components i.e. rubber seals. Think about how important it is to soak clutch disks in oil before installing them. Then you go and remove that oil with diesel. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements Sponsored links