Halps with a bearing

tjscott2012 · 04-28-2008, 03:20 PM

ok, i cant get the wheel bearing off of my xr75. i tried heating it, didnt work. i snapped a screwdriver prying it, i cant get it! how?

tigmaster · 04-28-2008, 03:22 PM

Usually you have to use a socket and pin the one bearing against the other and drove them both out.

tjscott2012 · 04-28-2008, 04:24 PM

nm, i got it, btw, its all working good now! all i needed was an oxen/dad to drive it out

turtlemann14 · 04-28-2008, 06:46 PM

lol

like my sig says, if it does not move at first get a bigger hammer

tjscott2012 · 04-28-2008, 08:03 PM

btw, wr was right. i found a bearing in my closet the other day, and i already had one, so i decided to go ahead and replace the bearings. no more wobble!

04-28-2008, 03:20 PM	#1 (permalink)
tjscott2012 The Spam man Join Date: Nov 2007 Location: Hurley, Mo Posts: 4,867 iTrader: (0)	Halps with a bearing ok, i cant get the wheel bearing off of my xr75. i tried heating it, didnt work. i snapped a screwdriver prying it, i cant get it! how? __________________ 87 Banshee Red Frame, Black plastics. bone stock (for now) -Life is full of ups and downs, so I say, get a quad and jump those mother****ers

04-28-2008, 03:22 PM	#2 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,526 iTrader: (1)	Usually you have to use a socket and pin the one bearing against the other and drove them both out. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

04-28-2008, 04:24 PM	#3 (permalink)
tjscott2012 The Spam man Join Date: Nov 2007 Location: Hurley, Mo Posts: 4,867 iTrader: (0)	nm, i got it, btw, its all working good now! all i needed was an oxen/dad to drive it out __________________ 87 Banshee Red Frame, Black plastics. bone stock (for now) -Life is full of ups and downs, so I say, get a quad and jump those mother****ers

04-28-2008, 06:46 PM	#4 (permalink)
turtlemann14 Pro Mototips Member Join Date: Oct 2007 Location: West Virginia Posts: 3,990 iTrader: (0)	lol like my sig says, if it does not move at first get a bigger hammer __________________ If it does not move at first, get a bigger hammer!! Myspace Yamaha 1982 xj550 under bike lights Kawasaki klx250 1979 custom fiberglass silencer+ Honda xr200r 1985 stock = Dakaw Dk250 2008

04-28-2008, 08:03 PM	#5 (permalink)
tjscott2012 The Spam man Join Date: Nov 2007 Location: Hurley, Mo Posts: 4,867 iTrader: (0)	btw, wr was right. i found a bearing in my closet the other day, and i already had one, so i decided to go ahead and replace the bearings. no more wobble! __________________ 87 Banshee Red Frame, Black plastics. bone stock (for now) -Life is full of ups and downs, so I say, get a quad and jump those mother****ers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3 Jaw Pilot Bearing Puller Auto , Motorcycle Tools	Mototips	Items for sale on ebay	0	04-10-2008 11:49 AM
ProX Wheel And Steering Bearing Sets	Mototips	DirtRider news	0	02-22-2008 05:50 PM

Remove advertisements Sponsored links