Whats the problem - Page 3

tigmaster · 04-29-2008, 04:24 PM

The reed cage should just pull out. If it doesn't then those screws are the obvious answer and you will need to remove them somehow.

gscx · 04-29-2008, 08:18 PM

i doubt it has anything to do with the reed cage, but checking it doesnt hurt, just take the head off and look at the top of the piston, make sure you use new gaskets for putting it together, itshould take you no more than 1 hour to do it

abowler10154 · 04-30-2008, 04:24 AM

Before i start working with the top end, how do i know if i need new reeds?

tigmaster · 04-30-2008, 06:00 AM

You should flex the reeds and look for any cracks, while I go back and read the first part of this thread to even know what we are talking about.

gscx · 04-30-2008, 04:23 PM

look at the end of the reeds and see if they are frayed, then check to makle sure they completely close and there isnt a little gap in them and the reed valve, your bike looks newer so is should be fine, they use carbon fiber now in them stock so it should be fine

abowler10154 · 05-08-2008, 04:16 AM

the reeds seem fine, (i got them out) Im gonna take apart my top end and look at my piston. Is there anything i should do before i remove the top thing under the sparkplug? Ive never opened it before.

tigmaster · 05-08-2008, 06:04 AM

Did you drain your coolant?

gscx · 05-08-2008, 06:42 AM

take off your gas tank and drain the coolant, then on the hondas you have to take off the carb to take the cylinder off, after that take off your radiators and then take off your bolts at the bottom of the cylinder that hold it on, there are 4 and i think there is a cover on the powervalve linkage that needs to come off and that might cover up the 4th bolt on the cylinder, after that loosen up your bolts on the head and the brace that holds the head to the frame, then take the cylinder off, check your piston and put a new one in, or if it is fine clean it off and then put your cylinder back on and reasemble, with new gaskets of course

tigmaster · 05-08-2008, 01:35 PM

Its first link.

http://www.mototips.com/how-s-perfor...e-rebuild.html

Hardtail · 05-09-2008, 04:12 PM

How are ya doing with it?

04-29-2008, 04:24 PM	#21 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	The reed cage should just pull out. If it doesn't then those screws are the obvious answer and you will need to remove them somehow. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

04-29-2008, 08:18 PM	#22 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,319 iTrader: (0)	i doubt it has anything to do with the reed cage, but checking it doesnt hurt, just take the head off and look at the top of the piston, make sure you use new gaskets for putting it together, itshould take you no more than 1 hour to do it __________________ 199? KX60- Bone stock and in process of complete rebuild and restoration

04-30-2008, 06:00 AM	#24 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	You should flex the reeds and look for any cracks, while I go back and read the first part of this thread to even know what we are talking about. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

04-30-2008, 04:23 PM	#25 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,319 iTrader: (0)	look at the end of the reeds and see if they are frayed, then check to makle sure they completely close and there isnt a little gap in them and the reed valve, your bike looks newer so is should be fine, they use carbon fiber now in them stock so it should be fine __________________ 199? KX60- Bone stock and in process of complete rebuild and restoration

05-08-2008, 06:04 AM	#27 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	Did you drain your coolant? __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

04-30-2008, 04:24 AM	#23 (permalink)
abowler10154 C Rider Join Date: Sep 2007 Posts: 65 iTrader: (0)	Before i start working with the top end, how do i know if i need new reeds?

05-08-2008, 04:16 AM	#26 (permalink)
abowler10154 C Rider Join Date: Sep 2007 Posts: 65 iTrader: (0)	the reeds seem fine, (i got them out) Im gonna take apart my top end and look at my piston. Is there anything i should do before i remove the top thing under the sparkplug? Ive never opened it before.

05-08-2008, 06:42 AM	#28 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,319 iTrader: (0)	take off your gas tank and drain the coolant, then on the hondas you have to take off the carb to take the cylinder off, after that take off your radiators and then take off your bolts at the bottom of the cylinder that hold it on, there are 4 and i think there is a cover on the powervalve linkage that needs to come off and that might cover up the 4th bolt on the cylinder, after that loosen up your bolts on the head and the brace that holds the head to the frame, then take the cylinder off, check your piston and put a new one in, or if it is fine clean it off and then put your cylinder back on and reasemble, with new gaskets of course __________________ 199? KX60- Bone stock and in process of complete rebuild and restoration

05-08-2008, 01:35 PM	#29 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	Its first link. http://www.mototips.com/how-s-perfor...e-rebuild.html __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

05-09-2008, 04:12 PM	#30 (permalink)
Hardtail Pro Mototips Member Join Date: Dec 2006 Location: Southeast V.A. Posts: 2,227 iTrader: (1)	How are ya doing with it? __________________ I love the smell of gasoline!! I woke up.....life is good!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2003 XR250R shock problem	nem881	Honda 4-Stroke	13	01-05-2008 09:21 PM
seeking for a good advice - klutch problem yz 125 04	israelmoto	General Bike Repair	28	12-27-2007 12:49 AM
Problem With Clutch. NEED HELP!!!	redcatgy200	General Bike Repair	2	11-16-2007 05:41 AM
Identifying your problem	wr250f95	How-To Articles	28	10-20-2007 07:13 AM
Brake problem, lack of pressure	rhoads157	General Bike Repair	5	07-23-2007 07:09 AM

Remove advertisements Sponsored links