Oil coming out of pipe.

MarKG · 06-13-2008, 01:15 AM

There is a oil leak coming out of the beginning of my pipe on my CR250R and it is very annoying. I don't think its trans oil. What do I do? The bike doesn't bog at all.

gscx · 06-13-2008, 03:26 PM

yea this will happen to 2 strokes. but it shouldnt be that bad. hondas have a gasket that goes between the cylinder and the piece thta connects the pipe, have you ever taken all of this off? or maybe the gasket is bad, this is probly the cause because the bike does have some age on it. im not ragging on it or nothing but im just saying, mines the same year, try replacing that gasket and the o rings on the pipe, if it has them and this should help

MarKG · 06-13-2008, 06:50 PM

Quote:

Originally Posted by gscx

yea this will happen to 2 strokes. but it shouldnt be that bad. hondas have a gasket that goes between the cylinder and the piece thta connects the pipe, have you ever taken all of this off? or maybe the gasket is bad, this is probly the cause because the bike does have some age on it. im not ragging on it or nothing but im just saying, mines the same year, try replacing that gasket and the o rings on the pipe, if it has them and this should help

Alright thanks a bunch. I will check it out.

MarKG · 06-14-2008, 03:46 AM

also is it normal for a 2 stroke to sputter when it first starts up cold?
and does cleaning the carbon out of the pipe help the bike run better?

tjscott2012 · 06-14-2008, 11:44 AM

yes. i dont know about the sputtering, if it just does it a little, it should be fine, but make sure your idle isnt too high

turtlemann14 · 06-14-2008, 02:15 PM

when you clean the carbon out of the pipe it opens up your bike a little more meaning that it will have slightly more power

but its not necessary

if there is more than a 1/8 of an inch of carbon i would run pipe cleaner down the header but your more than likely not going to be able to get it out of the expansion chamber

just be cautious of the muffler if your using a drill to spin the cleaner as it could catch on something and ruin it

gscx · 06-15-2008, 09:43 PM

there sint enogh carbon to biuld up a layer past the first bend, just dust. but just use a stiff steel brush to clean it out

06-13-2008, 01:15 AM	#1 (permalink)
MarKG C Rider Join Date: Jun 2008 Location: Lancaster, CA Posts: 101 iTrader: (0)	Oil coming out of pipe. There is a oil leak coming out of the beginning of my pipe on my CR250R and it is very annoying. I don't think its trans oil. What do I do? The bike doesn't bog at all. __________________ Main Bike: 2004 Honda CR250R Sponsors: Play Bike: 2005 Honda CRF50F ASV Inventions, Trail Bike: 2003 Honda XR100R SixSixOne.com

06-13-2008, 03:26 PM	#2 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,230 iTrader: (0)	yea this will happen to 2 strokes. but it shouldnt be that bad. hondas have a gasket that goes between the cylinder and the piece thta connects the pipe, have you ever taken all of this off? or maybe the gasket is bad, this is probly the cause because the bike does have some age on it. im not ragging on it or nothing but im just saying, mines the same year, try replacing that gasket and the o rings on the pipe, if it has them and this should help __________________ Sold

06-14-2008, 03:46 AM	#4 (permalink)
MarKG C Rider Join Date: Jun 2008 Location: Lancaster, CA Posts: 101 iTrader: (0)	also is it normal for a 2 stroke to sputter when it first starts up cold? and does cleaning the carbon out of the pipe help the bike run better? __________________ Main Bike: 2004 Honda CR250R Sponsors: Play Bike: 2005 Honda CRF50F ASV Inventions, Trail Bike: 2003 Honda XR100R SixSixOne.com

06-14-2008, 11:44 AM	#5 (permalink)
tjscott2012 The Spam man Join Date: Nov 2007 Location: Hurley, Mo Posts: 4,864 iTrader: (0)	yes. i dont know about the sputtering, if it just does it a little, it should be fine, but make sure your idle isnt too high __________________ 87 Banshee Red Frame, Black plastics. bone stock (for now) -Life is full of ups and downs, so I say, get a quad and jump those mother****ers

06-14-2008, 02:15 PM	#6 (permalink)
turtlemann14 Pro Mototips Member Join Date: Oct 2007 Location: West Virginia Posts: 3,986 iTrader: (0)	when you clean the carbon out of the pipe it opens up your bike a little more meaning that it will have slightly more power but its not necessary if there is more than a 1/8 of an inch of carbon i would run pipe cleaner down the header but your more than likely not going to be able to get it out of the expansion chamber just be cautious of the muffler if your using a drill to spin the cleaner as it could catch on something and ruin it __________________ If it does not move at first, get a bigger hammer!! Myspace Yamaha 1982 xj550 under bike lights Kawasaki klx250 1979 custom fiberglass silencer+ Honda xr200r 1985 stock = Dakaw Dk250 2008

06-15-2008, 09:43 PM	#7 (permalink)
gscx Pro Mototips Member Join Date: Aug 2007 Location: bridgeville DE Posts: 2,230 iTrader: (0)	there sint enogh carbon to biuld up a layer past the first bend, just dust. but just use a stiff steel brush to clean it out __________________ Sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
jet kit necessary with pipe?	gilroy222	How-To's & Performance forum	20	04-17-2008 07:28 PM
Oil Leak On The Pipe?	smitty0968	How-To's & Performance forum	5	03-04-2008 11:41 PM
Which pipe?	A's FaNaTiC	WR/YZ 250F	41	01-28-2008 10:50 PM
works of platnuim pipe	Midwest_Transplant	Mods & Performance Forum	5	12-10-2007 10:53 PM
Do dents in a 2 stroke pipe hurt preformance?	fatcat	Mods & Performance Forum	21	09-24-2007 01:26 PM

Remove advertisements Sponsored links