Rusted Up Bolt Heads

tigmaster · 02-25-2008, 06:47 PM

Well with the general frugality floating around between Jim and I, a technique devised by the scholar James Stephen Hoff came about, carried out by myself. So, if you couldn't tell from the thread name, which I assume most couldn't, this thread is about how to polish all the bolts on your bike and keep on having that good ole polished look. Its super simple and probably does not need more than a brief mentioning in some long lost thread but I figured that a full article would be god too. All you need is either a bench grinder with a wire wheel or a wire brush able to be chucked up in a drill. If you don't have either of these, buy them both because they are cheap and great to have. OK, so get yourself a good sized piece of cardboard first off, thickness is not of concern. Start by wire brushing all the heads of the bolts that you remove and as you finish wire brushing the bolts stick them through the cardboard and write next to them which part of the bike they are from. Now with all the heads flush on the cardboard piece, spray them with some good quality clear coat, at least 5 coats.

There, now you have the polished steel look without the rust. Just be careful when torquing the bolts down, the clear coat can come off easily.

wr250f95 · 02-25-2008, 07:15 PM

yes, shiny bolts are sexy

tigmaster · 02-25-2008, 07:38 PM

Hopefully this will add some appeal to my bike.

JThompson · 02-25-2008, 07:40 PM

Thanks for the how to welcome back to the front page

turtlemann14 · 02-25-2008, 07:47 PM

how does this affect the size of the bolt? one layer of clear is about 2 thousands of an inch thick

so thats like 2 hundreds all together...
getting close to a 32nd

tigmaster · 02-25-2008, 08:09 PM

It depends, if you happen to have bolts that perfectly fit the socket then you are screwed, otherwise like with myself they were super tight but still slipped on. I guess it is trial and error.

wr250f95 · 02-25-2008, 09:00 PM

its my turn for a how to, what to write what to write.
oh I know how about exhausts!!!!!

just kidding.

tigmaster · 02-25-2008, 10:26 PM

I was doing this tonight and I thought it would be a good write-up.

BansheeRider · 02-25-2008, 10:56 PM

i will try that if my bolts ever rust.

tigmaster · 02-25-2008, 11:04 PM

It doesn't even matter if they are rusted yet, just plain dirty and this will cure them.

02-25-2008, 06:47 PM	#1 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	Rusted Up Bolt Heads Well with the general frugality floating around between Jim and I, a technique devised by the scholar James Stephen Hoff came about, carried out by myself. So, if you couldn't tell from the thread name, which I assume most couldn't, this thread is about how to polish all the bolts on your bike and keep on having that good ole polished look. Its super simple and probably does not need more than a brief mentioning in some long lost thread but I figured that a full article would be god too. All you need is either a bench grinder with a wire wheel or a wire brush able to be chucked up in a drill. If you don't have either of these, buy them both because they are cheap and great to have. OK, so get yourself a good sized piece of cardboard first off, thickness is not of concern. Start by wire brushing all the heads of the bolts that you remove and as you finish wire brushing the bolts stick them through the cardboard and write next to them which part of the bike they are from. Now with all the heads flush on the cardboard piece, spray them with some good quality clear coat, at least 5 coats. There, now you have the polished steel look without the rust. Just be careful when torquing the bolts down, the clear coat can come off easily. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

02-25-2008, 07:15 PM	#2 (permalink)
wr250f95 Super Moderator Join Date: May 2007 Location: New Mexico Posts: 8,447 iTrader: (1)	yes, shiny bolts are sexy __________________ "LIFE'S JOURNEY IS NOT TO ARRIVE AT THE GRAVE SAFELY IN A WELL PRESERVED BODY, BUT RATHER TO SKID IN SIDEWAYS, TOTALLY WORN OUT, SHOUTING'...HOLY S**T... WHAT A RIDE!" this, is why I ride.

02-25-2008, 07:38 PM	#3 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	Hopefully this will add some appeal to my bike. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

02-25-2008, 07:40 PM	#4 (permalink)
JThompson Administrator Join Date: Aug 2006 Location: Bellingham WA Posts: 5,156 iTrader: (6)	Thanks for the how to welcome back to the front page __________________ Tired of ads? Become a member for an almost ad free site! Also we give away monthly prizes just for posting! Register today! Looking for places to ride! Want to review a riding area? Check them out! PRE-ORDER MOTOTIPS Stickers now. Help keep mototips running! Get your order in today! Buy NOW! Special Discounts for members only! Check out our new discount forum for retailers offering to help you save money! Mototips Discounts

02-25-2008, 07:47 PM	#5 (permalink)
turtlemann14 Pro Mototips Member Join Date: Oct 2007 Location: West Virginia Posts: 4,360 iTrader: (0)	how does this affect the size of the bolt? one layer of clear is about 2 thousands of an inch thick so thats like 2 hundreds all together... getting close to a 32nd __________________ If it does not move at first, get a bigger hammer!! Myspace Yamaha 1982 xj550 under bike lights Kawasaki klx250 1979 custom fiberglass silencer+ Honda xr200r 1985 stock = Dakaw Dk250 2008

02-25-2008, 08:09 PM	#6 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	It depends, if you happen to have bolts that perfectly fit the socket then you are screwed, otherwise like with myself they were super tight but still slipped on. I guess it is trial and error. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

02-25-2008, 09:00 PM	#7 (permalink)
wr250f95 Super Moderator Join Date: May 2007 Location: New Mexico Posts: 8,447 iTrader: (1)	its my turn for a how to, what to write what to write. oh I know how about exhausts!!!!! just kidding. __________________ "LIFE'S JOURNEY IS NOT TO ARRIVE AT THE GRAVE SAFELY IN A WELL PRESERVED BODY, BUT RATHER TO SKID IN SIDEWAYS, TOTALLY WORN OUT, SHOUTING'...HOLY S**T... WHAT A RIDE!" this, is why I ride.

02-25-2008, 10:26 PM	#8 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	I was doing this tonight and I thought it would be a good write-up. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

02-25-2008, 11:04 PM	#10 (permalink)
tigmaster Administrator Join Date: Aug 2006 Location: Missouri, United States Posts: 7,659 iTrader: (1)	It doesn't even matter if they are rusted yet, just plain dirty and this will cure them. __________________ --'03 CRF450r-- --FMF Pipe, Pro-Tech Revavle-- --Vortex Basket With Tusk Disks And HP Springs-- --Pro Taper Triple Clamps And Bars-- --Devol Full SP With Moose HGs-- --Renthal 13/50 With R1 Chain-- --Now It Is The End, Probably...-- --'06 CBR F4I-- --Bone Stock-- Check Our Latest How-To Here

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.mototips.com/how-articles/11939-rusted-up-bolt-heads.html
Posted By	For	Type	Date
Mototips	This thread	Refback	02-26-2008 08:39 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Knight and Hawk Still Battling as GNCC Series Heads to Ohio	Mototips	The latest supercross headlines and articles from the world.	0	10-09-2007 03:50 PM
Spies Heads for Japan	Mototips	Cycle News	0	10-03-2007 08:37 PM
Nicky Hayden Heads to England	Mototips	Cycle News	0	06-19-2007 09:23 PM
Sprocket Bolt Kit Motocross Enduro Dirt Bike	Mototips	Items for sale on ebay	0	05-18-2007 09:31 PM
Can-Am GNCC Series Heads to Loretta’s Looking For Fifth Winner in Five Races	Mototips	The latest supercross headlines and articles from the world.	0	04-26-2007 02:42 PM

Remove advertisements Sponsored links