rclement48

so how much oil do i need to put in before i put the bladder in?

dirtbikenut

you fill the reservoir with oil so that when you place the bladder in the oil will spill out over the top. Fill the reservoir to about 1/3 to 1/2 full and let some oil seep through in to the shock body prior to putting the bladder in, this will displace any air between the two parts of the shock body. Once the bladder is installed, and before you install the retaining clip, make sure the reservoir cap is and schrader valve is in the correct position (most important on later model YZ's ).

__________________
Thompson Racing Suspension

rclement48

cool thank for all your help