help please - Page 2

Hardtail · 04-27-2008, 12:35 PM

You might not have heard it, did you pull the top end off, or are you trying to yank the whole motor?

Hardtail · 04-27-2008, 12:48 PM

if you pull the top end before you yank the motor you would know if it is that, instead of pulling the whole thing and not needing to. Post pics if you can.

yz426f excel · 04-27-2008, 03:41 PM

i pulled the whole thing easyer to work with i will try to post pics if i can find my camera

turtlemann14 · 04-27-2008, 03:46 PM

jumping on your bike like that does not give it time to get oil to the bearings the cams in the head may be locked

Hardtail · 04-27-2008, 05:02 PM

Get a book on it, for the torque settings alone it's worth it!

yz426f excel · 04-27-2008, 06:43 PM

i dont think it is locked becasue after it stop i touched the case to see if it was super hot and it was not hot at all

Hardtail · 04-27-2008, 07:02 PM

The cyclinder would be hot right then ,but not nessicarily the case.

yz426f excel · 04-27-2008, 08:06 PM

i am going to pull into the motor tomorrow and see the bad news

jc--07 · 08-26-2008, 06:35 PM

if it is sezied its fairly easy to fix lol block of wood and wd-40

04-27-2008, 12:35 PM	#11 (permalink)
Hardtail Pro Mototips Member Join Date: Dec 2006 Location: Southeast V.A. Posts: 2,227 iTrader: (1)	You might not have heard it, did you pull the top end off, or are you trying to yank the whole motor? __________________ I love the smell of gasoline!! I woke up.....life is good!!!

04-27-2008, 12:48 PM	#12 (permalink)
Hardtail Pro Mototips Member Join Date: Dec 2006 Location: Southeast V.A. Posts: 2,227 iTrader: (1)	if you pull the top end before you yank the motor you would know if it is that, instead of pulling the whole thing and not needing to. Post pics if you can. __________________ I love the smell of gasoline!! I woke up.....life is good!!!

04-27-2008, 03:46 PM	#14 (permalink)
turtlemann14 Pro Mototips Member Join Date: Oct 2007 Location: West Virginia Posts: 4,363 iTrader: (0)	jumping on your bike like that does not give it time to get oil to the bearings the cams in the head may be locked __________________ If it does not move at first, get a bigger hammer!! Myspace Yamaha 1982 xj550 under bike lights Kawasaki klx250 1979 custom fiberglass silencer+ Honda xr200r 1985 stock = Dakaw Dk250 2008

04-27-2008, 05:02 PM	#15 (permalink)
Hardtail Pro Mototips Member Join Date: Dec 2006 Location: Southeast V.A. Posts: 2,227 iTrader: (1)	Get a book on it, for the torque settings alone it's worth it! __________________ I love the smell of gasoline!! I woke up.....life is good!!!

04-27-2008, 07:02 PM	#17 (permalink)
Hardtail Pro Mototips Member Join Date: Dec 2006 Location: Southeast V.A. Posts: 2,227 iTrader: (1)	The cyclinder would be hot right then ,but not nessicarily the case. __________________ I love the smell of gasoline!! I woke up.....life is good!!!

04-27-2008, 03:41 PM	#13 (permalink)
yz426f excel C Rider Join Date: Feb 2008 Posts: 10 iTrader: (0)	i pulled the whole thing easyer to work with i will try to post pics if i can find my camera

04-27-2008, 06:43 PM	#16 (permalink)
yz426f excel C Rider Join Date: Feb 2008 Posts: 10 iTrader: (0)	i dont think it is locked becasue after it stop i touched the case to see if it was super hot and it was not hot at all

04-27-2008, 08:06 PM	#18 (permalink)
yz426f excel C Rider Join Date: Feb 2008 Posts: 10 iTrader: (0)	i am going to pull into the motor tomorrow and see the bad news

08-26-2008, 06:35 PM	#19 (permalink)
jc--07 A Rider Join Date: Aug 2008 Location: Edinburgh Posts: 599 iTrader: (0)	if it is sezied its fairly easy to fix lol block of wood and wd-40 __________________ bikes are gooooooood

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove advertisements Sponsored links